Tkool Electronics

The Maximum load current of the transistor is 4A so do not drive load of more than 3.

SDR3200

The Maximum load current of the transistor is 4A so do not drive load of more than 3.

BC549 BC548 (These are the nearest possible replacement or equivalent of 2SC828 transistor.C828 Transistor Explained / Description:C828 is a BJT transistor that can be used for any general purpose requirements.

SDR3200

Always use a suitable base resistor and do not store and use the transistor in temperature below -55 Celsius and above 150 Celsius.Moreover it can also be used in the circuits of audio preamplifiers and amplifiers.C828 or 2SC828 is a TO-92 package BJT transistor; the article below provides information about the pinout.

SDR3200

therefore check pinout of any transistor you are willing to replace with C828.It can also be used at the output of low current devices such as ICs whos output current is low.

SDR3200

260-520 (S)Max Storage Operating temperature Should Be: -55 to +150 CentigradePNP ComplementaryPNP Complementary transistor of 2SC828 is 2SA564

260-520 (S)Max Storage Operating temperature Should Be: -55 to +150 CentigradePNP ComplementaryPNP Complementary transistor of 2SC828 is 2SA564.It can also be used as a replacement transistor of many other general purpose transistors.

Where We Can Use SS9012 Transistor How to UseAs mentioned above SS9012 is a general purpose PNP BJT transistor therefore it can be used in wide variety of general purpose applications.push({});Features / Technical SpecificationsPackage Type: TO-92Transistor Type: PNP Max Collector Current(IC): -500mAMax Collector-Emitter Voltage (VCE): -20VMax Collector-Base Voltage (VCB): -40VMax Emitter-Base Voltage (VBE): -5VMax Collector Dissipation (Pc): 625 MilliwattMax Transition Frequency (fT): 100 MHzMinimum Maximum DC Current Gain (hFE): 64 to 202Max Storage Operating temperature Should be: -65 to +150CentigradeNPN Complementary NPN Complementary of SS9012 is SS9013 Replacement and EquivalentAlternative transistors for SS9012 are S8550.

The transistor can be used for many common applications but according to the manufacturer it is mainly designed for audio amplification purposes and it can be used as a 1000mW amplifier for any device that provides few miliwatts audio output.SS9012G is 112~166 and SS9012G HFE value is 144~202.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap