Tkool Electronics

Use a suitable heatsink with the transistor and always store and operate between -65 centigrade and +150 Centigrade.

IEEE80

Use a suitable heatsink with the transistor and always store and operate between -65 centigrade and +150 Centigrade.

and do not store in temperature below -55 centigrade and above +150 centigrade.audio preamplifier stages etc.

IEEE80

With emitter-base voltage of only 5V this transistor can also be used at the output of microcontrollers.For example it can be used to drive high current relay switches.Due to its good collector dissipation and DC current gain characteristics it can also be used to amplify any type of signal.

IEEE80

BC877 (The Pin Configuration of the equivalent transistors shown here may be different from BC338 therefore it is suggested to always check the pinout of the transistor before replacing in the circuit.The max transition frequency (fT) of the transistor is 200 MHz therefore it can perform smooth under the 200 MHz frequency band region.

IEEE80

characteristics and other details about this transistor.

the max collector current of transistor is 0.LEDs and other loads which require current under 600mA.

2N5401 is a TO-92 Packaged PNP transistor.These type of transistors are quite useful where the load connecting through the transistor is consuming less current but on the other hand it is working on high voltage.

2SC2909 (The other transistors mentioned here may have different pin configuration as compare to the 2N5401 therefore it is must to check the pin configuration before replacing in the circuit.The other technical specifications are also very fair to use it as a general purpose transistor like collector current is 600mA which is quite enough to control relays.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap