Tkool Electronics

An LED is used at the output of the IC.

STM32F302CBT7-48-LQFP-STMicroelectronics

An LED is used at the output of the IC.

push({});Where We Can Use it How to Use:2SD882 can be used in variety of different application.switching any load under 3A etc.

STM32F302CBT7-48-LQFP-STMicroelectronics

push({});Features / technical specifications:Package Type: TO-126Transistor Type: NPN Max Collector Current(IC): 3AMax Collector-Emitter Voltage (VCE): 30VMax Collector-Base Voltage (VCB): 40VMax Emitter-Base Voltage (VEBO): 5VMax Collector Dissipation (Pc): 10 WattsMax Transition Frequency (fT): 90 MHzMinimum Maximum DC Current Gain (hFE): 60 – 400Max Storage Operating temperature Should Be: -55 to +150 CentigradePNP Complementary:PNP Complementary 2SD882 is 2SB772.in this post you will find D882 transistor pinout.and other details about this transistor.

STM32F302CBT7-48-LQFP-STMicroelectronics

always stay below 200mA from the maximum load ratings to be safe and always use a proper heatsinkalways stay below 200mA from the maximum load ratings to be safe and always use a proper heatsink.

STM32F302CBT7-48-LQFP-STMicroelectronics

A part from that it can be used as a switch to drive load under 500mA.

The transistor comes in four different part numbers like BC548.Its emitter-base voltage value also makes it ideal to use with microcontroller and other devices to drive loads under 5A.

Max collector dissipation of 65 Watt and the maximum current gain of 1000 which makes this transistor ideal to use in wide variety of switching and amplification purposes in the electronic circuits.With 5A of current one can drive verity of components like high power LEDs.

Where We Can Use it How to Use:TIP120 can be used in variety of switching and amplification related applications.TIP120 is a darlington pair NPN transistor.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap