Tkool Electronics

ApplicationsPreamplifierAudio amplifierAny Signal AmplificationDarlington pairDrive Load under 100mAHow to Get Long Term Performance To get long term performance form C558 it is recommended to operate load more than 100mA.

L6563STR-ST

ApplicationsPreamplifierAudio amplifierAny Signal AmplificationDarlington pairDrive Load under 100mAHow to Get Long Term Performance To get long term performance form C558 it is recommended to operate load more than 100mA.

mic preamplifiers and related circuits.And always store and operate the transistor in temperature above -55 centigrade and below +150 centigrade.

L6563STR-ST

with these features it can perform very well where there is requirements of more gain with low noise amplification of signals.therefore it is recommended to check pin configuration of the transistor you are using in the place of J201)J201 Transistor Explained / Description:J201 is a general purpose JFET transistor build for amplification purposes.5V it is ideal to use in battery powered circuits.

L6563STR-ST

Other than that it can also be used in infrared signal detection and amplificationOther than that it can also be used in infrared signal detection and amplification.

L6563STR-ST

The transistor is having some good features in its small packages like low cutoff voltage

It can drive maximum load of -6A or -6000mA and maximum load voltage can be -100V.Use a suitable base resistor with the transistor; always check the pin configuration before placing in the circuit

push({});Features / technical specifications:Package Type: TO-92Transistor Type: NPN Max Collector Current(IC): 600mA Max Collector-Emitter Voltage (VCE): 150VMax Collector-Base Voltage (VCB): 160VMax Emitter-Base Voltage (VEBO): 5VMax Collector Dissipation (Pc):  600 miliWattMax Transition Frequency (fT): 100 – 300 MHzMinimum Maximum DC Current Gain (hFE): 50 – 240Max Storage Operating temperature Should Be: -65 to +150 CentigradeNPN Complementary:NPN Complementary 2N5551 Replacement and Equivalent:2SA1319.push({});Where We Can Use How to Use BC5401 Transistor:As descried above this is a high voltage transistor therefore it can be used in any type of high voltage application in which the load is consuming less current.

today we are going to discuss its pinout configuration.for example AC circuit which are not using any transformer to step down the voltage before the AC to DC converter diode bridge.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap