Tkool Electronics

do not drive load more than 3A and 100V (The rule of thumb is always stay 20% below the maximum ratings).

STM32F207VGT6-100-LQFP-STMicroelectronics

do not drive load more than 3A and 100V (The rule of thumb is always stay 20% below the maximum ratings).

The transistor is capable to drive load of -50V and 150mAThe transistor is capable to drive load of -50V and 150mA.

STM32F207VGT6-100-LQFP-STMicroelectronics

The maximum emitter-base voltage of the transistor is 5V and the minimum saturation voltage is only 0The maximum collector-emitter voltage and collector-base voltage is 100V due to which you can use it to drive maximum 100V of load.push({});Features / technical specificationsPackage Type: TO-220Transistor Type: NPNMax Collector Current(IC): 6A or 6000mAMax Collector-Emitter Voltage (VCE): 100VMax Collector-Base Voltage (VCB): 100VMax Emitter-Base Voltage (VEBO): 5VMax Collector Dissipation (Pc): 65WMax Transition Frequency (fT): 3 MHzMinimum Maximum DC Current Gain (hFE): 15 – 75Max Storage Operating temperature Should Be: -65 to +150 CentigradePNP ComplementaryPNP Complementary of TIP41C is TIP42C Replacement and EquivalentThe replacement and equivalents for TIP41C transistor are 2SD1895.

STM32F207VGT6-100-LQFP-STMicroelectronics

for good and stable performance always stay below from the max values and always operate and store the device/transistor in temperature above -65 centigrade and below +150 centigrade.For driving loads a suitable heatsink should be used with this transistor.

STM32F207VGT6-100-LQFP-STMicroelectronics

TIP41C Transistor Explained / DescriptionTIP41C is a low cost general purpose power transistor that can be used for amplification and switching purposes in your electronic circuits.

do not drive load more than 100V.The collector-emitter voltage of the transistor is 20V.

output pins of some equivalents are different please see pinout details of the transistor you are willing to replaceand do not increase the output load from -700mA.

The S8550 possess some very good features in its small TO-92 package therefore it can be used in many electronics applications for example the output dissipation is 1 watt which is very good feature to use it for amplification of audio signal to around 1 watt and also in many other audio amplification stages.This article describes S8550 transistor pinout.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap