Tkool Electronics

therefore check pin configurations before replacing in your circuit.

IPD050N03LGATMA1-Infeline

therefore check pin configurations before replacing in your circuit.

push({});Where We Can Use it How to Use:BD137 can be used in any general purpose switching and audio amplification and other signal amplification applications.When using as a switch it can drive variety of loads in an electronic circuit such as motors.

IPD050N03LGATMA1-Infeline

5 Watt Max Transition Frequency (fT): 190 MHzMinimum Maximum DC Current Gain (hFE): 25 – 250Max Storage Operating temperature Should Be: -55 to +150 CentigradePNP Complementary:PNP Complementary of BD137 is BD138 Replacement and Equivalent:BD230.5A or 1500mA due to which it can drive variety of loads in your circuits.com/datasheet-pdf/view/16173/PHILIPS/BD137-10.

IPD050N03LGATMA1-Infeline

5 Watts making it ideal to use in audio amplification and other signal amplification in electronic circuits.  Other than that when using as an amplifier it can be used as a separate amplifier at the output of any device to drive speaker directly

IPD050N03LGATMA1-Infeline

  Other than that when using as an amplifier it can be used as a separate amplifier at the output of any device to drive speaker directly.

On the other hand the DC current gain of 25 to 250 and the max collector dissipation of 12Use a suitable base resistor with the transistor

Use a suitable base resistor with the transistor.Do not drive load of more than -100V through this transistor

push({});Features / technical specifications:Package Type: TO-220Transistor Type: NPN Max Collector Current(IC): 5AMax Collector-Emitter Voltage (VCE): 60VMax Collector-Base Voltage (VCB): 60VMax Emitter-Base Voltage (VEBO): 5VMax Collector Dissipation (Pc): 65 WattMinimum Maximum DC Current Gain (hFE): 1000Max Storage Operating temperature: -65 to +150 CentigradePNP Complementary:PNP Complementary of TIP120 is TIP125 Replacement and Equivalent:2N6388. Applications:Audio Power AmplifierAudio Amplifier StagesAudio Preamplifiers and Its StagesDriving or Switching Loads under 5AOut of MicrocontrollersHow to Safely Long Run in a Circuit:To safely run TIP120 transistor in your applications and to get long term performance with this transistor it is recommended to not operate load of more than 60V and 5A.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap