Tkool Electronics

The transistor is having some good features in its small packages like low cutoff voltage.

DM368

The transistor is having some good features in its small packages like low cutoff voltage.

Due to its general purpose features it can be used in variety of general switching and amplification applications in electronic circuits.With 500mW collector dissipation (Pc) value and 110 to 800 DC current gain value this transistor can also be used in variety of general signal amplification and audio preamplification purposes.

DM368

uses more details about this bipolar junction transistor.)BC556 Transistor Explained / Description BC556 is a common and general purpose bipolar junction transistor available in TO-92 package. Replacement and EquivalentAlternative transistors for BC556 are 2SA1016.

DM368

BC556B and BC556C and the only difference between these three different part numbers is the HFE values.always check pin configuration before placing in the circuit.

DM368

The 100mA collector current is quite enough to drive small loads in electronic circuits like relays.

If the ending alphabet is A then the HFE value will be 110~220.Always use a suitable base resistor to provide desired base current to the transistor.

The max collector dissipation of 65 Watts with gain of 1000 also makes it ideal to use for signal amplifications.raspberry Pi and other platforms to drive multiple loads.

Note: As suggested above 80V and 5A are the maximum ratings of this transistor.MJF6388 (These are the nearest possible substitute or alternate transistors that can be used in the place of TIP121.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap