Tkool Electronics

The maximum voltage this transistor allow through its collector to emitter is 45V that is a good feature which makes it suitable to use in circuits which require more than 24V.

256X16

The maximum voltage this transistor allow through its collector to emitter is 45V that is a good feature which makes it suitable to use in circuits which require more than 24V.

It is also available in SOT-23 package by some manufacturers.push({});Where We Can Use it How to Use:As mentioned above 2N5457 is designed for amplification purposes therefore it can be used in amplification of different type of low level signals whether it will be an audio signal or other type of signals in electronics.

256X16

applications and other useful info about this TO-92 packaged JFET transistor.NTE458 (Note: Pin configuration of some equivalent transistors may different from 2N5457.Having features like high gain.

256X16

low power operation due to which it can be used in battery operated devices.This article describes 2N5457 transistor pinout.

256X16

Do not drive load of more than 10mA.

0Max Power Dissipation is: 310mWMax Storage Operating temperature Should Be: -55 to +150 CentigradeLow Noise High GainReplacement and Equivalent:2N4339.specs features of this transistor.

On the other hand it can also perform well as an amplifier for signal and audio amplification and the total collector dissipation of the transistor is 800mW.Other than that it can also perform well in RF circuits and can be used in RF amplification and Oscillation circuits under 250MHz.

high power transistors and other components in a circuit.It possesses fast switching capability due to which you can use it in your applications where fast switching is required.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap