Tkool Electronics

The maximum emitter-base voltage of the transistor is 5V and the minimum saturation voltage is only 0.

SDR5200

The maximum emitter-base voltage of the transistor is 5V and the minimum saturation voltage is only 0.

and other details about where and how to use it in an electronic circuit.small radios and receiver circuits.

SDR5200

Moreover it can also be used for switching purposes for example the collector current of the transistor is 500mA which is quite good for operating loads like relays.Apart from that it can also be used as an alternative or equivalent transistor for other general purpose transistors in general applications like 2N3904.a suitable current limiting resistor for base of the transistor is essential.

SDR5200

output pins of some equivalents are different please see pinout details of the transistor you are willing to replace.16V which is also good as a general purpose usage.

SDR5200

another part of a circuit etc.

The collector-emitter voltage of the transistor is 20Valways use a suitable base resistor and do not operate and store this transistor in temperature below -55 Celsuis an above +150 Celsius.

Always use a suitable heatsink with the transistor.5A or 1500mABattery Chargers CircuitsPower Supply CircuitsMotor Driver CircuitsDarlington PairsHow to Safely Long Run in a Circuit:To get long term performance with this transistor in your circuit it is suggested to always stay some values below the maximum ratings.

and BD379BD137 Transistor Explained / Description:BD137 is a perfect NPN transistor if you are looking to replace a normal TO-92 transistor to a little bit high power to operate more loads in your circuit.Applications:Audio AmplifiersSwitching Loads under 1.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap