Tkool Electronics

push({});Features / Technical SpecificationsPackage Type: TO-92Transistor Type: PNP Max Collector Current(IC): -500mAMax Collector-Emitter Voltage (VCE): -20VMax Collector-Base Voltage (VCB): -40VMax Emitter-Base Voltage (VBE): -5VMax Collector Dissipation (Pc): 625 MilliwattMax Transition Frequency (fT): 100 MHzMinimum Maximum DC Current Gain (hFE): 64 to 202Max Storage Operating temperature Should be: -65 to +150CentigradeNPN Complementary NPN Complementary of SS9012 is SS9013 Replacement and EquivalentAlternative transistors for SS9012 are S8550.

VS-3EGU06-M3/5BT-VISHAY

push({});Features / Technical SpecificationsPackage Type: TO-92Transistor Type: PNP Max Collector Current(IC): -500mAMax Collector-Emitter Voltage (VCE): -20VMax Collector-Base Voltage (VCB): -40VMax Emitter-Base Voltage (VBE): -5VMax Collector Dissipation (Pc): 625 MilliwattMax Transition Frequency (fT): 100 MHzMinimum Maximum DC Current Gain (hFE): 64 to 202Max Storage Operating temperature Should be: -65 to +150CentigradeNPN Complementary NPN Complementary of SS9012 is SS9013 Replacement and EquivalentAlternative transistors for SS9012 are S8550.

2N50022N3866 Transistor Explained / Description2N3866 is a TO-38 package transistor build for RF related applications.RF drivers and RF amplifications in VHF and UHF band regions.

VS-3EGU06-M3/5BT-VISHAY

Today we are going to discuss about 2N3866 transistor pinout.Additionaly it can also be used in digital communications and RF sensor circuits for example RF temperature sensors.Or other wise you can also use the equivalent and substitue for 2N3866.

VS-3EGU06-M3/5BT-VISHAY

The max collector dissipations of 5 watt and the max transition frequency of 500MHz makes this transistor ideal to use in RF oscillators. ApplicationsRF OscillatorsRF Driver StagesRF AmplifiersHow to Get Long Term Performance in a CircuitFor getting long term performance with 2N3866 the user should not drive load of more than 400mA and 30V.

VS-3EGU06-M3/5BT-VISHAY

2N3866 is not available in most stores but you can still get them in some online and local stores who have its old stock.

push({});Where We Can Use it How to UseAs mentioned above 2N3866 is an RF transistor therefore it can be used in RF applications in VHF frequency band that is from 30MHz to 300MHz.(The replacement and equivalent transistor shown here are the nearest possible replacement for SS9015.

But the pin configuration of these transistors may different from the SS9015 therefore check pinout of the transistor before replacing in a circuit.This transistor is mainly designed for low gain signals amplification.

)SS9015 Transistor Explained / Description:SS9015 is a well-known PNP silicon BJT transistor.Normally when a low gain signal is amplified to high gain then the noise with the signal is also get amplified but this transistor possess low noise feature which filters noise from the amplified signal and hence you will get a low noise and high gain signal at the output.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap