Tkool Electronics

The aim of this project is to design a water level detecting alarm with simple and low-cost hardware without compromising on the performance of the device.

DM368

The aim of this project is to design a water level detecting alarm with simple and low-cost hardware without compromising on the performance of the device.

STM32L1 and STM32L4 microcontrollersthe product page on the official website of Diode incorporated.

DM368

As the Smartphone and portable device manufacturers integrate into camera modules with high resolution and speed.ICC: 15μA Typical ESD Tolerance: 2kV HBMNote: More technical details can be found in the product brief document attached below The PI3WVR648GEAEX provides fast switching between the 5 lanes that are arranged in a 10 channel single pole.3V Operates at a supply voltage of 1.

DM368

Diodes Incorporated announced the PI3WVR648 five-lane MIPI 2:1 switch for switching physical layers that comply with either C-PHY or D-PHY.The PI3WVR648GEAEX supports both High speed and Low power MIPI.

DM368

The 2:1 multiplexing allows fast switching between HS and LP MIPI physical interfaces.

it is necessary to support high speed (HS) MIPI and supporting low power (LP) MIPI is also equally important in battery-powered applications.many engineering students are showing lot of interest towards embedded systems projects in which microcontrollers are used.

: We can design a binary clock by using PIC controller and LEDs.Humidity Controller using PIC microcontroller: The humidity controller project is used to detect and control the humidity level by using PIC.

I-button lock by using PIC controller: The PIC controller based I-button lock system is a home security project.The input is given by a keypad and the result will be appeared on the LCD screen.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap