Tkool Electronics

The IC is consisting of two separate operational amplifiers in a single package.

AFE4400

The IC is consisting of two separate operational amplifiers in a single package.

In this post we are going to discuss about MJE350 transistor pinout.MJE350 can not only used in high voltage circuits for switching but it can also be used in low voltage or battery operated circuits as switch.

AFE4400

Applications:Inverter UPS ApplicationsSwitching Power Supply ApplicationsLinear Power Supply ApplicationsBattery Charger CircuitsAudio AmplificationDC High Voltage SwitchingMotor Controller ApplicationsHow to Safely Long Run in a Circuit:Getting long term performance with MJE350 it is suggested to always use it atleast 20% below its maximum ratings.uses and other details on how and where we can use this transistor.The maximum collector-emitter voltage is -300V therefore do not apply more than 240V across collector-emitter.

AFE4400

push({});Features / Technical Specifications:Package Type: TO-126Transistor Type:  NPNMax Collector Current(IC): –5AMax Collector-Emitter Voltage (VCE): –300VMax Collector-Base Voltage (VCB): –300VMax Emitter-Base Voltage (VEBO): –5VMax Collector Dissipation (Pc): 20 WattMax Transition Frequency (fT): 4 MHzMinimum Maximum DC Current Gain (hFE): 30– 240Max Storage Operating temperature Should Be: -65 to +150 CentigradeNPN Complementary:NPN Complementary of  MJE350 is MJE340Replacement and Equivalent:Here are some nearest possible replacements and equivalents of MJE350: 2SA795.push({});Where We Can Use it How to Use:MJE350 can be used in wide variety of general purpose applications like switching and amplifications for not only in high voltage circuits but also in low voltage and battery operated circuits.

AFE4400

With the max collector dissipation of 20W this transistor can also perform well in audio amplifier related applications.

MJE350 is a TO-126 packaged PNP high voltage transistorApplications:Switching loads under 800mADarlington pairsAudio amplifierAudio amplifier stagesAudio PreamplifierAudio Preamplifier stagesSensor circuitsHow to Get Long Term Performance with BC338To get long term performance with BC338 it is recommended to always check pin configuration before placing in a circuit.

Moreover BC338 can also be used in audio applications for example it can be used in different audio amplifier stages.625 miliwatt and max current gain is 630 due to these characteristics it can perform well in audio frequency related applications.

 Where How to Use BC338 Transistor:BC338 can be used in wide number of switching and audio related applications.8A or 800mA due to which it can drive variety of loads in the electronic circuits.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap