Tkool Electronics

The collector-emitter voltage is upto 400V which makes this transistor reliable to use in many electronic applications under 400V.

BYV26A-TAP-VISHAY

The collector-emitter voltage is upto 400V which makes this transistor reliable to use in many electronic applications under 400V.

Also you can use a suitable heatsink with the transistor in case of higher operating temperature.specs features of this transistor.

BYV26A-TAP-VISHAY

On the other hand it can also perform well as an amplifier for signal and audio amplification and the total collector dissipation of the transistor is 800mW.Other than that it can also perform well in RF circuits and can be used in RF amplification and Oscillation circuits under 250MHz.high power transistors and other components in a circuit.

BYV26A-TAP-VISHAY

It possesses fast switching capability due to which you can use it in your applications where fast switching is required.Use a proper heatsink in applications in which the junction temperature of the transistor increases while operating.

BYV26A-TAP-VISHAY

Moreover it can also be used as a signal amplifier for any type of electronic signal amplification.

its transition frequency is 250MHz therefore it can be used in RF circuitry that works under 250MHz.Other than that it can also be used as a separate audio amplifier at the output of an audio equipment to drive a speaker directly or it can also be used in stages of an audio amplifier circuit.

The max load this transistor can handle is 500mA therefore use it to drive 400mA to be safe.MJE340 is not only limited to use for above mentioned purposes however it can also be used for amplification purposes.

this rule apply to all components and hence it will also apply on MJE340 too.The max load voltage is 300V (Apply max 240 to be safe).

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap