Tkool Electronics

5A that is quite acceptable to use this transistor to drive variety of loads in a circuit with the maximum load operating voltage of 60V DC.

REF5050

5A that is quite acceptable to use this transistor to drive variety of loads in a circuit with the maximum load operating voltage of 60V DC.

It can also be used for switching purposes.This same method will apply to MPF102 transistor.

REF5050

This post contains information about MPF102 pinout.It can also be used as a switch but it can drive load of only 10mA.But other than that it can also be used in verity of other audio amplification related applications.

REF5050

Do not drive load of more than 25V and 10mA.push({});Features / Technical Specifications:Package Type: TO-92Transistor Type: N Channel Max Voltage Applied From Drain to Source: 25VMax Drain to Gate Voltage Should Be: 25VMax Reverse Gate to Source Voltage is: –25VMax Continues Gate Current is: 10mAMinimum to Maximum Gate to Source Cuttoff Voltage :  -8.

REF5050

Although the transistor is not available any more now a days but some suppliers still having them in their stock and you can find it by searching with some reputable components suppliers.

The transistor possesses high gain and low noise features which make it ideal to use for very small or low level signals amplification whether it is an RF signal.it can also be used as a substitute and replacement to many transistors.

The typical saturation voltage is only 90 millivolts which is also a good sign to use it as a switchThe saturation voltage of most BJT transistors are 0.

the max load this transistor can drive is around 150mA or 0.3V therefore it can perform well in low voltage circuits or in any circuit where low base voltage is available and other BJT transistors are not saturating.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap