Tkool Electronics

Mind Controlled Robots using EEG Using LabVIEW: The objective of this project is to build a mind controller to control the movements of a robotic vehicle through brainwave output.

VS-15CTQ045SPBF-VISHAY

Mind Controlled Robots using EEG Using LabVIEW: The objective of this project is to build a mind controller to control the movements of a robotic vehicle through brainwave output.

I will design and demonstrate a simple Frequency Counter Circuit.Frequency Counter Circuit Diagramgoogletag.

VS-15CTQ045SPBF-VISHAY

The duty cycle is given by D = (R1+R2)/(R1+2R2)Substituting the value of D to be 0.you have to use the following formula.the resultant value is formatted by performing some simple mathematics so that it will be easy to display the result on the 16X2 LCD Display.

VS-15CTQ045SPBF-VISHAY

display(div-gpt-ad-1527869606268-7); });Frequency Counter Circuit DesignAs I have used Arduino to generate the Square Wave.You can use either Arduino or a completely build your own Square Wave Generator using 555 Timer IC by configuring it as an Astable Multivibrator.

VS-15CTQ045SPBF-VISHAY

Also Read the Post – Two Digit Up-Down Counter CircuitFrequency Counter Circuit Operating PrincipleThis circuit is based on the simple definition of frequency.

frequency=(TH1*256)+TL1;In order to convert the Frequency Value to Hertz i.Results are shown on the LCD conneted in the circuit.

PI Control for Brushless DC Motor Running at Entered Speed: By using the PIC micro controller we can control the speed of brush less DC motor.The bunch of LEDs (or an LED bed) is connected with the PIC controller.

so in this way it prevents cheating and fraud in electricity usage.These circuits takes care of transmitting digital signals using radio or infrared waves.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap