Tkool Electronics

for better performance always stay 20% below from the maximum ratings.

MC78M15CDTRKG-ON

for better performance always stay 20% below from the maximum ratings.

Applications:Uninterrupted power SuppliesPower Supply CircuitsInverter CircuitsBattery Charger CircuitsMotor ControllersAudio Amplifier Audio Amplifier StagesHow to Safely Long Run in a Circuit:For long life and good performance it is suggested to not use MJE13005 to its maximum limits and it is always better to use it atleast 20% below from its max ratings.Today we are going to discuss about 13005 / MJE13005 transistor pinout.

MC78M15CDTRKG-ON

push({});Where We Can Use it How to Use:MJE13005 can be used for variety of high voltage applications such as high voltage power supplies.Although the transistor is built for high voltage application but it can also be used as a switch or amplifier in low voltage and battery operated circuits.It can also be used in stages to build high power amplifier or can also be used as a separate amplifier to drive a speaker

MC78M15CDTRKG-ON

It can also be used in stages to build high power amplifier or can also be used as a separate amplifier to drive a speaker.The maximum load voltage is 400V so always stay around 300V to 320V DC

MC78M15CDTRKG-ON

In most audio amplifier applications it can be used with its NPN complimentary MJE340 to get good audio output watts.

The transistor is capable to handle maximum load voltage of 300V which makes it ideal to use in much high voltage DC applications.Apart from that the maximum DC current gain of the transistor is 1000 and the max collector dissipation is 65W due to which it can also be used in audio and other signal amplification purpose.

The transistor can drive load of upto 5A.Applications:Audio Power AmplifierAudio Amplifier StagesAudio PreamplifiersDrive Loads under 5ACan be used at the output of microcontrollerHow to Safely Long Run in a Circuit:To get long term performance with TIP127 it is recommended to not operate load of more than 5A through this transistor.

The pin configuration of these transistors may be different.If want to use one in the replacement make sure to check the pinout details before replacement in your circuit.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap