Tkool Electronics

This is just an older model of the same product

88X15

This is just an older model of the same product

The Gate to source voltage should be under ±20V and always store or operate the transistor in temperature above -55 centigrade and below +175 centigrade.microcontrollers and electronics platforms like Arduino and Raspberry Pi etc.

88X15

Moreover it can also be used in different kinds of power supplies and battery management applications.IRF1010AIRFZ44N MOSFET Explained / Description:IRFZ44N is a widely used MOSFET transistor designed to use in variety of general purpose applications.push({});Features / Technical Specifications:Package Type: TO-220Transistor Type: N ChannelMax Voltage Applied From Drain to Source: 55V Max Gate to Source Voltage Should Be: ±20VMax Continues Drain Current is : 49AMax Pulsed Drain Current is: 160AMax Power Dissipation is: 94WMinimum Voltage Required to Conduct: 2V to 4VMax Storage Operating temperature Should Be: -55 to +170 CentigradeReplacement and Equivalent:IRFZ46N.

88X15

This transistor can also be used as an audio amplifier or in audio amplifier stages; it is capable to deliver maximum audio output of 94W.The transistor possesses high speed switching capability which makes it ideal to use in applications where high speed switching is a crucial requirement.

88X15

However the peak pulse current can be upto 160A.

The same rule will be applied for IRFZ44N.ApplicationsApplications that requires fast switchingHigh voltage applicationsAC motor drivers and controllers applicationsDC Motor drivers and controllers applicationsUPSBattery charger circuitsLighting and ballast circuitsHow to Get Long Life PerformanceFor long life performance of a component its important to not use a component on its maximum ratings and always use it atleast 20% below from its max ratings

The transistor is having quite good specs which make it suitable to use in wide variety of applications.push({});Where We Can Use it How to Use:MPSA56 can be used for variety of general purpose switching and amplification requirements in electronic circuits.

The maximum collector-emitter voltage is 80V therefore do not drive load of more than 64V and always use or store this transistor in temperature above -55 degree Celsius and below +150 degree Celsius.As a switch it can drive load of upto -500mA therefore it can drive many LEDs.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap