Tkool Electronics

push({});Where We Can Use it How to Use:As mentioned above SS9018 is built to work in RF applications therefore it can perform well in these type of circuits.

IRFU5410PBF-Infeline

push({});Where We Can Use it How to Use:As mentioned above SS9018 is built to work in RF applications therefore it can perform well in these type of circuits.

push({});Features / technical specifications:Package Type: TO-92Transistor Type: NPN Max Collector Current(IC): 100mA Max Collector-Emitter Voltage (VCE): 65VMax Collector-Base Voltage (VCB): 80VMax Emitter-Base Voltage (VEBO): 6VMax Collector Dissipation (Pc):  500 miliWattMax Transition Frequency (fT): 150 MHzMinimum Maximum DC Current Gain (hFE): 110 – 800Max Storage Operating temperature Should Be: -65 to +150 CentigradePNP Complementary:PNP Complementary BC556 Replacement and Equivalent:BC547.It is also recommended to use a suitable base resistor and always solder or attach the transistor in the circuit by checking the right pins.

IRFU5410PBF-Infeline

This post describes the BC546 transistor pinout.the maximum DC current gain value is 800 and the maximum collector dissipation of this transistor is 500 miliWatt due to which this device can be used in many audio and signal amplification purposes.features and some other useful information about this transistor.

IRFU5410PBF-Infeline

collector dissipation of 500 miliWatt.it possesses high gain and low noise type features.

IRFU5410PBF-Infeline

 Apart from that the transistor also possesses some very good characteristics that make it ideal to use in audio amplification related applications or other signal amplification purposes.

It can easily be used voltages under 65V.MJE350 can not only used in high voltage circuits for switching but it can also be used in low voltage or battery operated circuits as switch.

Applications:Inverter UPS ApplicationsSwitching Power Supply ApplicationsLinear Power Supply ApplicationsBattery Charger CircuitsAudio AmplificationDC High Voltage SwitchingMotor Controller ApplicationsHow to Safely Long Run in a Circuit:Getting long term performance with MJE350 it is suggested to always use it atleast 20% below its maximum ratings.uses and other details on how and where we can use this transistor.

The maximum collector-emitter voltage is -300V therefore do not apply more than 240V across collector-emitter.push({});Features / Technical Specifications:Package Type: TO-126Transistor Type:  NPNMax Collector Current(IC): –5AMax Collector-Emitter Voltage (VCE): –300VMax Collector-Base Voltage (VCB): –300VMax Emitter-Base Voltage (VEBO): –5VMax Collector Dissipation (Pc): 20 WattMax Transition Frequency (fT): 4 MHzMinimum Maximum DC Current Gain (hFE): 30– 240Max Storage Operating temperature Should Be: -65 to +150 CentigradeNPN Complementary:NPN Complementary of  MJE350 is MJE340Replacement and Equivalent:Here are some nearest possible replacements and equivalents of MJE350: 2SA795.

访客,请您发表评论:

Powered By Tkool Electronics

Copyright Your WebSite.sitemap